IgLou Support

Category » DSL Service in BellSouth Area

There were 6 articles found in this category:

1. Why doesn't my VPN connection work?
   Some background is required to understand why this may be a problem for you. If you're just looking for a fix, skip down to the section labeled Solution below. The modems for our residential Bellsouth-area DSL plans are preconfigured so that you can hook up multiple computers using network addre ...
2. Zoom 5551 Configuration
   Zoom 5551 Modem Settings Insert CD. If Autorun is disabled go to Start then Run. Type D:\setup.exe Click on the ADSL Modem Installation Wizard button. Select English. Select Ethernet. Once the wizard completes and the computer is rebooted, there should be an icon on the desktop labeled, Zoom ...
3. How do I configure OS X to use DHCP?
   1) Go to the Apple Menu -> System Preferences 2) Click on Network 3) In Network, next to "Show", make sure that "Built-in Ethernet" is selected (unless they are using an AirPort Base Station, then select AirPort. To configure the AirPort, see the setup under OS 9 "AirPort Base Station Setti ...
4. Zoom X4 5651 and 5551a PPPoE Configuration
   NOTE: Do not use this procedure on your Zoom DSL modem unless instructed by IgLou technical support. Improper configuration of your DSL modem may cause interoperability issues with certain websites and may degrade performance or reliability. Open your web browser and go to http://10.0.0.2/. ...
5. Zoom X4 5651 and 5551a Routed Configuration
   NOTE: Do not use this procedure on your Zoom DSL modem unless instructed by IgLou technical support. Improper configuration of your DSL modem may cause interoperability issues with certain websites and may degrade performance or reliability. Open your web browser and go to http://10.0.0.2/ . ...
6. IP Address Configuration
   All of IgLou's BellSouth served DSL customers can obtain their IP address automatically by configuring their computers to "Obtain an IP address automatically" or "Use DHCP to obtain an IP address". Most computers are set this way by default and will only require being plugged in to a synchronize ...