Westell WireSpeed Ethernet
Homepage
Data Sheet:
westell_wirespeed_36R516.pdf (1.0 M) | LED | State | Indication |
| Power | Green | Power On |
| Off | No Power | |
| Ready | Slow Flashing Green (1/sec) | Power on and passed diagnostics, no sync |
| Flashing Green (2/sec) | Posyncwer on, attempting to sync | |
| Green | Syncronized with CO | |
| Red | Hardware diagnostics | |
| Flashing Red | Hardware diagnostics failed, modem or firmware bad | |
| Alternating Red/Green | Diagnostic failed | |
| Off | No power | |
| Link | Green | Ethernet link established |
| Off | No ethernet link/No Power | |
| Activity | Flashing Yellow | Ethernet traffic |
| Off | No Ethernet traffic/No Power |
Westell Configuration
Download the following utility if you need to change the VPI/VCI sttings on your modem. Create a new folder on your desktop and unzip the files to that folder.
Double-click on the ATURupgrade icon to launch the utility. You should see the following screen:
Click on the Advanced button. Click on the configure button on the next screen.
The VPI should be set to 8 and the VCI should be set to 35. Click on the Set button.
Click on the Close button.
Click on the Exit button.
Related Articles
No related articles were found.Attachments
No attachments were found.Visitor Comments
Article Details
Last Updated
13th o July, 2006
