Cisco 678 (unsupported)
This modem is known to work but unsupported, we have a customer working with one of these modems on VPI 0 VCI 32. There are very likely other settings for this modem. If you have one of these modems and would like to use it with IgLou's DSL service, make sure you know what the VPI and VCI are and tell the sales person during the call so your line can be ordered with the proper configuration.
Here is the configuration details for setting one of these up, as provided by a customer. You will need to be in enable mode to do this. Unfortunately, IgLou can not offer any other technical support for this modem. Type the following; hit (enter) after each line: enable [password] set nvram erase write reboot Type the following; hit (enter) after each line: enable [password] set bridging rfc1483 enabled set bridging management enabled set interface wan0-0 disabled write set interface wan0-0 vpi 0 set interface wan0-0 vci 32 set interface wan0-0 enabled write reboot
Related Articles
No related articles were found.Attachments
No attachments were found.Visitor Comments
Article Details
Last Updated
13th o July, 2006
